more 16v rocco brake parts

[Andrew Stauffer <andrew.stauffer@cannondale.com>]

Hey gang,
Trying to piece together a completer 16v rocco brake set and I'm down to
finding some small ancillary bits.  I got alot of great help from this list
when I needed the proportioning valves and pedal to pushrod hardware and now
I'm after another piece, hopefully some one can help.    

The part I need is the pushrod that goes into the master cylinder/booster
assembly.  It connects the brake pedal to the mc/booster.  It is apparently
a two piece unit that allows for adjustment of the length, as the mc/booster
that I bought has a threaded rod  sticking out of it, but not the half of
the pushrod  that actually attached to the brake pedal.   Can anyone out
there help?  

Please contact me at the email addy in the sig below as sadly,  work forces
me to be on the digest version.  

Thanks all!
   

Andrew Stauffer
Cannondale Purchasing
www.cannondale.com
andrew.stauffer@cannondale.com
ph. 814 623 4516
fax 814 623 8917
83 GTI 2.0 8v
86 Scirocco 1.7, regressing.....



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org