[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: heaters



now you talking about a different problem (which I had)if the fan does not 
come on on 2-3-4(ac models) then its the resistor on your fan OR your fan 
switch taht is faulty, I replaces the switch first, and my resistor had a 
broken wire, cleaned the fan unit , soldered the wire back on and everything 
works just fine.

Now for HEAT problems (ie: no heat or little heat, I had this problem - NO 
HEAT in -30'F temperature last febuary) my problem was a clogged heater core 
(I have a quick and dirty tech note how to replace them, about 30-50$ for 
one at local scrap yeards), also possible your wire that runs from your 
heater exchange panel snapped and is no longer controlling the valve in your 
engine bay (opens and closes the flow to teh hjeater core, you can see this 
problem with a simple visual looking into your engine bay. (2 hoses go 
through your firewall, just before that one of them has a plastic valve on 
it, see if the wire is still attached, boken or loose, you might just 
require an adjustment is all.

g'luck

Patrick

    ___  ___________
   /   |/_  __/ ___/  A Texan's Scirocco 1985 8v
  / /| | / /  \__ \   http://www.longcoeur.com/scirocco
/ ___ |/ /  ___/ /   (AIM) patricdlc, (ICQ) 32918816
/_/  |_/_/  /____/



----Original Message Follows----
From: NastyRican1021@aol.com
To: scirocco-l@scirocco.org
Subject: Re: heaters
Date: Fri, 2 Nov 2001 12:07:28 EST

i got the same problem with my heater. my heater doesnt work...it usto work
on 2 and 3 but now it just doesnt work at all.....any tips?


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org