[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TECH-Q] best way to remove stuck bolts on crank pully?



The best I have found if you have limited tools is a drill with a bit the 
same size as the bolt . 
When you get the pully off you can twist the remaining bolt out with your 
fingers most the time. 
If all else fails dont worry about ruining the cogged pully , that big nut 
lets you replace that too . 

Jasin
MN rustbelt dweller
ALWAYS pound in allen tools

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org