Re: I hate My Rocco right now--Resolved

["S. Coleman" <deadbolt@mindspring.com>]

Woohoo!  Congrats...glad to hear it is back on the road.  I had a very
similar problem over a year ago when I first installed my motor.  Eric
chimed in and told me the solution,......got to love these guys that have
their shite together!@
Enjoy!
Chris


----- Original Message -----
From: timothy piwonka <t.piwonka@worldnet.att.net>
To: scirocco list <scirocco-l@scirocco.org>
Sent: Friday, June 01, 2001 10:33 PM
Subject: Re: I hate My Rocco right now--Resolved


> Got It running.  I just had to look at the distributer while someone was
> cranking the engine and rotate the distributer until it started.  After
> playing with the timing I got it running, I did not have it 180 out.
>
> Thanks for the info on the firing order typo in the bently
>
> Me and my rocco are now getting along again.   :-)  what a wonderful
> relationship.
>
>
> Robert
> ----- Original Message -----
> From: Cheapass Ron <rapieper@yahoo.com>
> To: timothy piwonka <t.piwonka@worldnet.att.net>
> Sent: Friday, June 01, 2001 6:27 PM
> Subject: Re: I hate My Rocco right now
>
>
> > The conductor part of the rotor should point to the #1
> > plug at TDC.
> >
> > You may have things 180 out...remeber the rotor makes
> > one turn for every two of the crank (I'm sure you know
> > this).  So it may be worth rotating all wires two
> > positions to see what happens.
> >
> > ROn
> > --- timothy piwonka <t.piwonka@worldnet.att.net>
> > wrote:
> > >
> > >
> > > OK, I did have the wires hooked incorrectly so I
> > > fixed them and hooked the
> > > wires up 1-3-4-2 counter clockwise, still won't
> > > start.  I thought maybe I
> > > had the rotor 180 degress off so i removed the
> > > distributor and rotated the
> > > rotor 180.  still no start.  after switching the
> > > wires it does turn over
> > > smoother but won't Run.
> > >
> > >
> > > Can someone check and see when the engine is a top
> > > dead center which part of
> > > the rotor points at the # 1 plug, insulated or
> > > conducting side?
> > >
> > >
> > > Thanks
> > >
> > > Robert
> > > ----- Original Message -----
> > > From: T. Reed <treed2@u.washington.edu>
> > > To: timothy piwonka <t.piwonka@worldnet.att.net>
> > > Sent: Friday, June 01, 2001 1:13 PM
> > > Subject: Re: I hate My Rocco right now
> > >
> > >
> > > >
> > > > Okay, I bet I know what you did.
> > > >
> > > > The plug wires go on the distributor 1-3-4-2
> > > COUNTER-clockwise. Bentley
> > > > neglects to mention this. I had my hall sender
> > > crack and fall off too so I
> > > > replaced it with a brand new one and put new plug
> > > wires on too and the car
> > > > started but was undrivable. It ran kinda rough,
> > > but most of all it just
> > > > sounded different. It wouldn't rev up right.. I
> > > was about to buy a new
> > > > coil when I asked someone on the list about the
> > > firing order and they
> > > > mentioned the typo in the bentley. Switched the
> > > wires and she drives
> > > > great!
> > > >
> > > > I hope that's it!
> > > >
> > > > -Toby
> > > >
> > > > --
> > > > '87 16v
> > > >
> > > > On Fri, 1 Jun 2001, timothy piwonka wrote:
> > > >
> > > > > Ok My rocco leaves me stranded and I thought I
> > > knew the problem  but it
> > > > > seems I was wrong.
> > > > >
> > > > > The distirbutor was leaking oil and the hall
> > > sender was hanging by the
> > > wires
> > > > > so I order a brand new bosch distirbutor form
> > > adirondack, install it and
> > > > > after messing with the timing it runs.  Runs
> > > like crap and not drivable
> > > but
> > > > > it will start.  So I check the coil wire and it
> > > was burned partly by the
> > > > > exahust so i get a new one and a brand new bosch
> > > coil. still runs like
> > > crap.
> > > > >
> > > > > Hook the timing light up to it and the light
> > > will not flash.  It has an
> > > > > inductive pick up but when on the no 1 spark
> > > plug wire no flash.  I put
> > > the
> > > > > pick up on the coil wire just for fun and no
> > > flash.  Take the timing
> > > light
> > > > > back thinking it is bad but the new one does not
> > > flash either.  The
> > > spark
> > > > > plugs are new as well. Now after runign very
> > > rough it will n0ot start
> > > again.
> > > > >
> > > > > well shit .... What should I look at now.
> > > > >
> > > > > Just for reference my car is an 86 16V and it
> > > was running very well
> > > about a
> > > > > week ago.  The engine has about 75,000 miles on
> > > it.
> > > > >
> > > > > please help
> > > > > thanks
> > > > > Robert
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Email LIST problems to:
> > > scirocco-l-probs@scirocco.org.
> > > > > To unsubscibe send "unsubscribe scirocco-l" in
> > > the message to
> > > majordomo@scirocco.org
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Email LIST problems to:
> > > scirocco-l-probs@scirocco.org.
> > > To unsubscibe send "unsubscribe scirocco-l" in the
> > > message to majordomo@scirocco.org
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get personalized email addresses from Yahoo! Mail - only $35
> > a year!  http://personal.mail.yahoo.com/
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org