[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: scirocco font

To: "T. Reed" <treed2@u.washington.edu>, Jan Folkson <jfolkson@optonline.net>, scirocco-l@scirocco.org
Subject: Re: scirocco font
From: Macsek <scirocco@eureka.eth.ericsson.se>
Date: Mon, 22 Jan 2001 00:12:17 +0100
Cc: scirocco list <scirocco-l@scirocco.org>
In-Reply-To: <Pine.A41.4.21.0101210142530.55476-100000@dante07.u.washington.edu>
References: <B68E609E.2E94%jfolkson@optonline.net>
Sender: owner-scirocco-l@scirocco.org

Hi Jan & Toby,
I downloaded it and it is something similar. (only the R is different in 
scirocco)

I hope Jeremy will create his fonts and it will be easier to use.
And David sent me two fonts but I was not able to use them

thanks
macsek

>I found this on the web and installed it. You're right -- it's very
>similar. With a little editing in a font program I bet you could get it
>almost exact.
>
>http://www.fontcentral.com/archives/gunship.zip
>
>HTH,
>
>-Toby


--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- Re: scirocco font
  - From: Jan Folkson <jfolkson@optonline.net>
- Re: scirocco font
  - From: "T. Reed" <treed2@u.washington.edu>

Prev by Date: 2H/4K vs. standard 16v trans.
Next by Date: Re: stalling in turns
Prev by thread: Re: scirocco font
Next by thread: Scirocco sighting
Index(es):
- Date
- Thread