Re: Lower stress bars was Re: Prep (on a budget) Q's

[Brett Van Sprewenburg <brett@netacc.net>]

>How is the 16V bar attached?  Sciroccos are a rare breed - I've worked on 3,
>two were mine.  Could I just replace the front control arm mounting bolts
>with longer bolts that go through a piece of square tubing and accomplish
>the same thing, or are there more than two attachment points?  Does anyone
>have a pic of a lower stress bar installed?
>
>At a glance, it looks like a bar would clear the engine if it were installed
>that way.  Is it worth my time to try it?  How big would it have to be
>(assuming I use steel)?
>
>Aaron

Look at the bottom right hand corner, this bar is about the only improvement
on the stock Scirocco 16v bar.


http://www.eurosportacc.com/html/lowerstress.htm

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '92 Passat 16v (Winter+) | - brett@netacc.net

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org