[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Grrr! Clutch cable pulling through bulkhead (RHD)



On Tue, 27 Feb 2001 17:38:02 -0000 "Stuart Castledine"
<s.castledine@ntlworld.com> writes:
> This happened to me this morning, leaving me without the use of the 
> clutch.
> Luckily I was only 5 miles from work - still not much fun driving 
> through
> town in the rush hour with no clutch...
> 
> The same thing happened a few years ago and I had the split welded 
> up, but
> I'm going to fix it myself this time. I'm sure I've read about a 
> preformed
> plate being available for this repair because it's a well known weak 
> spot -
> anyone know? I could do with a quick fix because it's my only car 
> and I'm
> not sure how long the bodge job I did at work will last.
> 
> TIA,
> 
> Stuart
> '88 GTX

You can put a large washer between the firewall and the clutch cable.

The A2 clutch cable puck, is the proper size. 

Peter
'79 Scirocco 16V project car
'83 GTI "Caged Rabbit" 
'84 Scirocco, RD/FF
'80, '88 Scirocco rollers

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org