Re: Bad Idling and Missing below 4200 RPM

["Chris DeLong" <green536@hotmail.com>]

The silicon coating around the high tension leadcan fail and as a result the 
spark will arc through the rubber and cause the wire to fail. I have seen it 
before thats how i know. Its not really that uncommon.


>
>On Wed, 26 Dec 2001 17:01:06 +0000 "Chris DeLong" <green536@hotmail.com>
>writes:
> >An ohm meter is only going to tell you if they have continuity. They
> >can
> >have continuity and still be bad. Replace em.
>
>
>How? If they spec out, how can they be bad?
>
>
>Shawn Méze
>86' Jetta GLi 8V     84' Scirocco 8V    88' Corvette -SS 30- 2001 SDR
>Solo2 Champion
>82' Scirocco GTi -FSP 54-     79' "Project FSP Scirocco"
>The Fastest, Quickest, Cleanest and best looking Scirocco(s) in all of
>San Diego!
>http://www.Geocities.com/MotorCity/Speedway/1308/index.htm
>
>________________________________________________________________
>GET INTERNET ACCESS FROM JUNO!
>Juno offers FREE or PREMIUM Internet access for less!
>Join Juno today!  For your FREE software, visit:
>http://dl.www.juno.com/get/web/.
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org.
>To unsubscibe send "unsubscribe scirocco-l" in the message to 
>majordomo@scirocco.org
>


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org