[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Rear Spindles



I had a couple of gouges in one side. So long as the couge is only 1/8 wide
and perfectly round, a new bearing may still work fine on it. The inner race
will have enough to grab onto, and new bearings wont spin the inner race
like a past set did. What causes the whole thing is letting too much play
develope in the rear bearings.
Al

----- Original Message -----
From: "John Erickson" <hombre@elp.rr.com>
To: "scirocco list" <scirocco-l@scirocco.org>
Sent: Monday, December 03, 2001 7:23 PM
Subject: Rear Spindles


> While in the process of renewing my brakes, I discovered that my rear
> spindles are trashed.  There are some pretty deep gouges in both
> sides.  Anyone have some decent looking used ones they'd like to part
with?
>
> John
> 87 16v
> El Paso
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org