Re: euro bumper bolts

["Dan Bubb" <jdbubb@ix.netcom.com>]

Uh.....the Euro bumper uses a courser theard....
The stock bumper bolt is 1.5 mm thread peak-to-peak
The Euro bolt is 1.75 mm peak-to-peak
Dan


----- Original Message -----
From: Mash <type53@yahoo.com>
To: dave t <pearl16v@hotmail.com>; <humpnyomom@home.com>
Cc: <scirocco-l@scirocco.org>
Sent: Tuesday, August 07, 2001 5:42 PM
Subject: Re: euro bumper bolts


> --- dave t <pearl16v@hotmail.com> wrote:
> > Here's what i found out:
> >
> > the bolts that come w/ the US bumpers are 12x1.5x25
> > the ones required for the Euro bumpers are
> > 12x1.75x25
>
> The difference is refered to as the "pitch",
> translated - the euro bolts are a finer thread.
>
>
> =====
> Mark Peele
> 1985 Scirocco, 1982 Scirocco, 1981 Scirocco, 1978 Scirocco, 1987 Golf GT
> http://www.scirocco2.de/mark.htm
> Direct Mail: SCIROCCO_GTX@YAHOO.COM
> ZENDER SCIROCCO 1 SIDE SKIRTS - Considering selling
> Need parts? try http://www.parts4vws.com/ (Potterman)
> or http://www.germanautoparts.com/ (Adirondack)
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org