Re: Needin' a gear...any help?

["Jody Bailey" <scirocco8v@home.com>]

well I got a 4k tranny layin hear with the driver side mount ripped off the
top taking the top with it.  I was going to ask if anyone wanted me to tear
it down to get them any parts.  If you think I can get what you want with a
Bently manual and lots of mechanical experience but no tranny work, then I
will do it first thing tomorrow.  The tranny ran fine (no grinding in any
gears) so it should be alright...this was before I hit a concrete barrier at
over 100kmh but this just ripped the top of the tranny off, nothing inside
seems damaged.  Tell me what you think and I will get at.

Jody Bailey
http://www.scirocco8v.com


----- Original Message -----
From: "Ron Pieper" <rapieper@yahoo.com>
To: "Scirocco.org list" <scirocco-l@scirocco.org>
Sent: Wednesday, April 04, 2001 3:22 PM
Subject: Needin' a gear...any help?


> I need a 4th gear for an 8V tranny.  Specifically, the
> 35 tooth gear that goes on the pinion shaft for any
> 1.13 ratio 4th gear (the mating gear has 31 teeth,
> getting both would be a plus).
>
> Mine has two chipped teeth.  Suffice it to say that it
> was not butchery that damaged this gear.
>
> So, if anyone has one laying around, please please
> please let me know.
>
> Thanks
>
> Ron
> Cincinnati
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org