[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Finally My Swap has been completed! (Turbo G60)



Whew.. all i can say is FAST!.. heh.. i'm running at 10psi rignt now, and it starts pulling in at about 5psi. I need to get a new wastegate though, so i can run about 14 or so. The only problem i'm having now, is adjusting the shift linkages, 2nd gear doesn't like to go in very good, and i get scared sometimes, cause i can't get it in.. I have the Jc whitney shifter. at first when i put it on, i thought i had all gears, but i only had 3,4,5. so i reversed out onto the hill, the house is on a hill. and thought it was weird trying to go up the hill cause it wasn't pulling. the we realized that we were in 3rd. haha. even in 3rd gear, the rocco pulls! Yup. i'm having lot's of fun now.
 
For those of you don't know, i just completed a G60 swap with turbo into my 80 rocco. The swap was done due to pissing oil in my 1.6. I also swapped out my 4spd and put in a 5 spd, also using a 6 pad clutch and a 16v 2L pressure plate.
 
If anyone has any suggestions about the adjustment of the linkages. please let me know Thanks
 
 
Wing