RE: Motor mount nightmare

[Randy Block <RandyB@E-Risk.com>]

I believe Techtonics Tuning still sells that mount pressed in and ready to
go for around $60.
That's what I did on both my Mk1's, Faster, easier, and worth the cost.
http://www.tttuning.com/ <http://www.tttuning.com/> 
Check them out, they know their stuff.
You might also check the Potterman, I'm not sure if he sells them already
pressed in or not,
Mike, you out there?
http://www.parts4vws.com/ <http://www.parts4vws.com/> 
GL

Randy B
Mars 81S - techtonics tuning 1847cc 8V
Cosmos 81S - future project
87 Jetta GLI 16V - daily driver

	-----Original Message-----
	From:	VWMikeLVW@aol.com [SMTP:VWMikeLVW@aol.com]
	Sent:	Tuesday, November 28, 2000 12:23 PM
	To:	Snowst2912@aol.com; scirocco-l@scirocco.org
	Subject:	Re: Motor mount nightmare

	In a message dated 11/28/00 12:16:22 PM Pacific Standard Time, 
	Snowst2912@aol.com writes: 
	
	
	

		When my motor is rocking way too much.  My intercooler pipes
are pulling off 
		the tb.  Now I know the front and rear mounts are relatively
easy to 
		replace, 
		but are the side mounts a nightmare?....any tips? 
		
		



	It's the passenger side one that sucks....it will take the first
timer, 
	mechanical type person a couple hours to wrestle it in there. Do
yourself a 
	favor and have the mount pressed into a spare bracket to avoid down
time. 
	Once more, there most likely won't be anyplace open to get it
pressed on that 
	saturday morning you choose to tackle the project. Make sure they
put the 
	mount in right side up though!! 
	
	Mike 
	http://www.geocities.com/vwmikel <http://www.geocities.com/vwmikel>

	'84-Arkay Turbo Rabbit GTI 
	'84-Rabbit GTI - uh..... 
	'77-Rabbit - project 
	'80-Scirocco S - (um... to be:1.9L crossflow, turbo, 6 speed,
widebody?)

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org