[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: stripped CV bolts---REMOVED, and tranny Q?



Air tools are a wonderful thing.  I have changed many CVs over the years, with very little trouble.  My secret weapons: an air impact wrench and a good quality (snap on) 12 point tool or allen, depending on the car.

Bill

---------- Original Message ----------------------------------
From: "Casey Webster" <tinfool@home.com>
Date: Thu, 16 Nov 2000 23:49:27 -0500

>Thanks for everyones input on this.  I finally got them removed when my girlfriends dad came over to help me and brought his air compressor.  combination of air ratchet and air chisel removed all the bolts.  We had a few other problems with the tranny, but I think I've got all those worked out, so i should be able to get the 9A tranny in tommorrow morning
>
>When I turn one driveshaft, shaft on the other side of the car should turn a) same way or b) opposite way???  I suspect it should be the same way, but in my old car (RWD) the drive wheels turned opposite.  I only ask this because the tranny I'm taking out turns opposite directions and the tranny I'm putting in turns the same direction.  
>
>THANK YOU EVERYONE
>
>Casey
>84 Roc
>88 Golf
>
>
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
>"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org