[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Couple of 16v questions




--- Shannon Fenton <sfenton@amazon.com> wrote:
> My break pedal has been doing that for a couple of years.
> Its probably the
> master cylinder. Cam chain is easy....just be very
> careful loosening and
> tightening the bearing caps. I have seen cams snap when
> someone was just
> loosened each cap all the way while the others were still
> torqued down. But
> I cant see the chain being able to make any noise. It
> couldnt stretch to the
> point of making any noise. If it did it would jump right
> off the sprockets
> first. You know the drill....
> 
Believe it or not, I *have* heard a couple of cam chains
that have gotten noisy, just not this bad.  I'm not 100%
positive that this is actually the culprit though, so I'll
be doing some more investigating.

Thanks!

Daun

__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org