Re: Audi 2.0 that's in the 924

[VeeWdriver@aol.com]

In a message dated 07/07/2000 11:16:17 PM US Mountain Standard Time, 
green536@hotmail.com writes:

<< The head will not bolt up. You wont be able to put a JH head on it without 
 serious machining and modifications to the block/head. Dont waste your time. 
 Get a newer 944 2.0l engine and put that puppy in there. Less work. >>

Actually, it would be a lot of work to put the 944 motor in an old 924.  The 
front crossmembers are different and they will not interchange easily.  
Cutting and welding must be done to the unibody, brackets/mounts must be 
fabricated, and you have to use mostly 944 pieces up there.  If you like the 
924 and want the 944 motor, save your pennies and get a later 924S.

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org