Re: [all] removing axels q' and adding offset

["Chris DeLong" <green536@hotmail.com>]

>has anyone had good experiences with a machine shop
>changing the offset of a set of rims? my coilover
>retaining ring rubbs up against my msw type 55's(17")
>so i need to bring the wheel out about 1/2", i was
>planning on taking them to a machine shop and getting
>a plate welded on the back side and the 5 holes drilled,
>plus this will let me ditch the hubcentric rings. Is this
>a good idea?


I would recommend getting thee 1/2" spacers that are made by H&R. I think 
they are balanced and I know they wokr perfect. You will also need longer 
lug bolts.


Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V Rag
'80 Rocco (new!)
'65 Bus (ugly, but good for campin' W/toaster oven)
'82 GLI (now with a happy shaved, solenoid operated trunk)
'80 'Vert
'61 17 Window
'78 Scirocco


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org