Re: do you think my fuel problem is fixed?

["Wing Gee" <winggee@hotmail.com>]

I was gonna use my existing arkay fueler box. as the box pulses the
injectors under load and boost. i would need to look in my boxes and bins
for a solid state relay as i don't think a mechanical one can pulse that
fast. nah.. i don't have any kind of feedback system. but i do have a o2 on
my manifold. so i'm gonna use a volt meter for now to monitor it.. plus i
figure i rather run rich than lean. and if it's too rich. i'll either put an
inline valve or restrictors in the line. so most likely the mixture will not
be constant but fully rich.

at least there's a cold start valve in each runner, even though it doesn't
atomize it well, at least there will be fuel in the cylinder.

i have a g60 rail but it's too much trouble to fab that onto the manifold. i
figure.. anything gotta be better than now..

Wing Gee
80' Turbo Scirocco
84' Scirocco - With Lotsa parts
Http://www.TurboRocco.com (Almost There)
----- Original Message -----
From: "Jonas Karlsson" <jonas85k@hotmail.com>
To: <winggee@hotmail.com>; <scirocco-l@scirocco.org>
Sent: Friday, December 22, 2000 12:08 PM
Subject: Re: do you think my fuel problem is fixed?


> >From: "Wing Gee" <winggee@hotmail.com>
>
> >I think it's fixed  ;-) *Snicker*
> >http://members.nbci.com/trike007/manifold/
>
> Yeah, this is the kind of shit I want to see!! Nice job Wing.
>
> A couple of questions though. How are you planning on running them? With
the
> full throttle switch, always on, some fancy electronics, etc.?
>
> Also keep in mind that most people agree that the cold start valve is not
> intended for prolonged use, and does not provide optimal fuel atomization,
> but you can't beat the price. :-)
>
> And I forget, but does your 80 have an oxygen sensor? If not, how will you
> be making sure that mixture is correct throughout the RPM range? i.e. the
> cold start valves deliver fuel at a constant rate, and the fuel
distributor
> varies fuel delivery with air consumption, so without some feedback system
> you'd have a difficult time making sure it is stochiometric throughout the
> RPM range.
>
> Again, I like what I see. Home fabrication is the most fun part of this
> scirocco obsession thing.
>
> Jonas
> 85 Scirocco 2.0
> 78 Scirocco 1.8
> 87 Scirocco 16V
> For direct reply: jonas@metabolex.com
> http://www.geocities.com/scirocco2l8v
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org