Re: 16V Valve Cover

["Craig Williams" <roccolister@hotmail.com>]

Sal,

There are two different lengths if valve cover bolts. And, yes they are
bolts. They have a 10 mm head and there are two longer ones that go in the
middle of the valve cover, but the threads are the same for all of them. I
don't have anything in my garage to measure the threads for you, but if I
had to guess they are 10X1.5 (I hope that's right) Also if I had to guess,
the bolts are the same size (other then length) as the ones that hold the
cover plate to the clutch side of the transmission.

HTH -- Craig

----- Original Message -----
From: Sal Guzzo <pellom@yorku.ca>
To: Scirocco list <scirocco-l@scirocco.org>; VW 16V
<a2_16V@connecticom.com>; VW Club <VWofT@onelist.com>
Sent: Friday, August 11, 2000 8:39 PM
Subject: 16V Valve Cover


> The bolts which mount the valve cover to the head are bolts or studs on
the
> 16V?  Which bolts can I use, seeing that I no longer have these bolts?
>
> Thanks
>
> Sal
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org