[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Installing aftermarket front swaybar...
If it's a used Neuspeed, replace the ball & socket joints that connect at the
A-arm. I just ordered some from Potterman today (he knows the real name of
those parts, I've managed to forget in the past 2 hours). Mine were shot. He
tells me there's about a four year life on those (YMMV). Also, make sure you
have the centering washers. It will add a couple bucks and time to the
install, but it will save you from doing it again later.
-Brad
Jared Erlandson wrote:
> in place of the factory one.... Anybody have any advice before I put it up
> and start taking off brackets?
>
> Thanks
>
> Jared Erlandson
> 87 8v
>
> --
> Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org