[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Exhaust hangers



<x-charset ISO-8859-1>I bent the hanger enough hard to get the thing and after swapping it I bent
it back.
This method is not very good, because you might break the hanger.

> Anyone got any tips on how to get a polyurethane hanger on the mount under
the
> gearstick without removing the exhaust. The problem i have is that it will
move
> side to side banging against the gearstick heat shield but not up and down
so i
> can get the crappy rubber hanger off

Lauri!



--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-charset>