Re: firing order.

["Gerry Reichelt" <reichelt@telepath.com>]

    I've replaced the hall sender on my dist. Got the kit from a vendor in
EC, don't remember which one but the part was Bosch ($100). I've also seen a
16v dist.(new) for $159 (+$30 core), same price as their rebuilt one. Again,
I don't remember the vendor but the ad was a full page black/white.

> >From what I've heard on this list, trying to repair the Hall sender is
> somewhat of a PITA, but it is doable. I believe Roland J. mentioned
> something about VW selling a repair kit, but he's in Sweden, so I'm
> uncertain on availability in the US (you're in the US, right?).
>
> I've also heard of people soldering the wires back on, with good results.
>
>
> Anyway, it would involve taking out the distributor, then repairing it,
> and (of course) installing the fixed distributor. If you can get a hold
> of a working distributor at a low cost, it might be worth it to you to
> just swap the whole thing (less downtime, less headache, etc.) That's
> the way I would go, but I also have a bunch of junkyards around to seek
> one out in.
>
> BTW, what year is your rocco?
>
> GL
>
> Jonas
> 85 Scirocco
>
>
> Tyler Chamberlain wrote:
> >okay, you were right. One of the three wires that comes from the
> >hall sensor broke off just at the connection outside the
> >distributer, is there any way that I can pull the wire out and
> >connect it up again? Or do I just have to get a whole
> >new distributer?
> >
> >Jonas Karlsson wrote:
> >
> >> Firing order is 1-3-4-2
>
>
> --
> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> If you experience other problems, email: scirocco-l-probs@scirocco.org
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org