[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: power door locks




so, did you install an aftermarket actuator in the
driver's door along with the factory central locking?


Alex Ting
Account Manager
Millennium Solutions Group, Inc.

Phone: 888-801-2001 ext. 228 or 916-630-2001
Fax:  916-630-2000
Email:  alex@millenniumsolutions.net

-----Original Message-----
From: Riley McDowall <roog@home.com>
To: Greg Davis - German Plates Available <scirocco@iglou.com>
Cc: Alex Ting <alex@millenniumsolutions.net>; scirocco-l@scirocco.org
<scirocco-l@scirocco.org>
Date: Tuesday, March 02, 1999 8:10 PM
Subject: Re: power door locks


>At 10:13 pm -0500 2/3/99, Greg Davis - German Plates Available wrote:
>>Ben Harder is currently addressing the problem of integrating the factory
>>locks in with his alarm.  Problem being the drivers door won't lock unless
>>with the key.    I believe his thoughts are to add an aftermarket lock
>>actuator to the drivers door only, tying the alarm in to it.   Use the
>>alarm to lock that actuator will trigger the rest of the factory system to
>>lock normally.   Sounds like a great idea!
>>
>>Greg :)
>
>It is!  That's how it works in my car... I have one actuator in the
>driver's door, which actuates the entire system as it locks or unlocks that
>door.  :)
>
>
>
>--
>To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>If you experience other problems, email: scirocco-l-probs@scirocco.org
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org