Re: SV: What makes the tach tick?

[Shawn C Meze <skerocdriver@juno.com>]

On Thu, 3 Jun 1999 09:45:34 +0200 "Roland Johansson"
<scirocco@mail.bip.net> writes:
>Hard wire it in is the easiest part. On the back side of the circuit =
>board you have three (more actualla but other are of no interest) M4 =
>bolts coming thrue. Those are power, ground and coil. Connecting the =
>instrument to power and you should be able to see what bolt is ground, 
>what is power and the third should be connected to the coil.
>
>Roland Johansson, Swedish Viking


Actually, no. 
The VDO tach has 2 M4 bolts for the fuel gauge.
3 are for the water temp gauge.
then across the top there is nothing. There is a 4 pin plug on the back
of the tach. (Only 3 are used) Which pin goes where? Ill take it that
this is the power, groud and something else for the tach?


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org