Re: 16V distributor

["Brian Honnold" <bhonnold@pac-cap.com>]

Ok, so that's good news and bad news.  Thank you all for playing

Now, how do I go about taking the little bugger apart to check the parts
taht may or may not be too far gone???

It looks like there is a pin to drive out on the bottom but I couldn't see
how to remove the uppper plate of the hall sender???

Any advice from the experts?

Brian Honnold
'78 Rocco Ragtop
'99 Passat GLX
'87 16V distributor that leaks
-----Original Message-----
From: Brett Van Sprewenburg <brett@netacc.net>
To: virtualworld@earthlink.net <virtualworld@earthlink.net>
Cc: scirocco-l@scirocco.org <scirocco-l@scirocco.org>
Date: Wednesday, April 21, 1999 7:08 PM
Subject: Re: 16V distributor


>>I have the seals & have rebuilt them in the past.  Some (as Brett
>>found out :(....are to far gone.  The heat can get to them & ruin
>>certian parts that are not availible seperate thus forcing the buy a
>>new one issue.
>>
>>HTH
>>Potterman
>
>No kidding... :(
>
>Uh, yes Alex.  I'll take 'Unexpected & Expensive 16v Only Parts' for
>$170 please?
>
>Mike:  did you get my message on the coolent outlet flange?
>
>Thanks.
>
>==Brett
>
> \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
>\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net
>
>
>
>--
>To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>If you experience other problems, email: scirocco-l-probs@scirocco.org
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org