Re: Radiator bottle

["Brian Honnold" <bhonnold@pac-cap.com>]

>But he's installing the overflow bottle, so he needs the one with the extra
>nipple. huh huh uhu hhuh
>
>BTW I should be done with my engine swap tommorow! Wish me luck!
>


That extra nipple you speak of in on the sheep out back.

Actually the stock Mk1 water line will work,  you just need the head outlet
from a Mk2 and the extra fitting on the Mk1 line works

Brian

>At 11:04 PM 9/6/98 -0700, you wrote:
>>Whose looking for that water line, Dan or Nate?????????
>>
>>My beer goggles are pretty thick but I've got that very tube in a box of
>>goodies.
>>
>>Brian
>>-----Original Message-----
>>From: VWN8@aol.com <VWN8@aol.com>
>>To: nowlan@flash.net <nowlan@flash.net>; scirocco-L@scirocco.org
>><scirocco-L@scirocco.org>
>>Date: Sunday, September 06, 1998 10:35 PM
>>Subject: Re: Radiator bottle
>>
>>
>>>
>>>In a message dated 9/6/98 11:30:46 PM, nowlan@flash.net writes:
>>>
>>>>Confirmed same number on all three of mine.  Right one.  When you say it
>>>>doesn't fit too well, can you elaborate on that a little more?  Is it
just
>>>>a bit tough to get it to fit in the two brackets it slides into due to
>>>
>>>Te bottle fits in the bracket well. The trouble is it actually touches
the
>>>brake fluid bottle and doesn't leave much room for one of the vacum lines
>>and
>>>the clutch cable. I also need to bend the brake lines a little to make
room
>>>for the hose that goes out the bottom of the bottle. All in all it didn't
>>seem
>>>right to me.
>>>>no
>>>>"slack"?  AFAIK, that's pretty normal.  Need more info.
>>>
>>>I still need to find the little steel tube that runs from the water pump
to
>>>the heater (among other things). Does anyone have an extra one they would
>>like
>>>to sell?
>>>>
>>>>Dan
>>>>'86 8v red martian (for now)
>>>>
>>>--
>>>To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
>>>with your request (subscribe, unsubscribe) in the BODY of the message.
>>>
>>
>>--
>>To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
>>with your request (subscribe, unsubscribe) in the BODY of the message.
>>
>>
>--
>"If God had meant for us to use the metric system, we would've been born
>with ten fingers and ten toes."
>
>Kevin Fry .:. 81 Scirocco S
>      San Diego, CA
>

- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------