Re: 16v Crankcase Ventilation Problem?!!!!?

["Mike & Kristen Potter" <kmpotter@ix.netcom.com>]

> > The Potterman uses a catch tank (An old brake fluid bottle) for his 
> > Rocco. I devised a way to make one so it would be stock looking and 
> > drainable. I decided against it since there is limited space in that 
> > ares of my car as it is. 
> 
> How does your setup work Potterman???
> 
Well when I was using that setup it worked like this, I ran the breather
hose to the left of the car under the intake boot & used a 90 deg tube to
another hose & attached it to a plastic connection piece that VW uses for
a heater hose connection, drilled a hole the same size as the connection
in the brake fluid bottle cap & screwed the cap on. It did take care of
the oil all over my trans that was coming through the swiss cheese airbox.
Since then I used two of the inline containers from a 77 only & stuffed
them with Type 3 (Yeh Air cooled) oil breather screens. + ran a vacum line
from 1 of the containers to the throttle body to burn off any moisture
that had accumulated while sitting. Still no oil in the airbox after 6
months of autoxing throwing 7 grand rev's through the course. & the box is
even more ported ( thanks to shawn & his uncontroable dremmel ) than
before.

POTTERMAN
80 SCIROCCO S






 
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.